Ultem 9085 3D Printing in Yorba Linda CA

Get Accurate Models With Ultem 9085 3D Printing in Yorba Linda CA!

At ProTek Models, we offer reliable and quality FDM 3D printing services. We take great pride in our work and can essentially print every FDM material available on the market. That includes Ultem 9085. If you are looking for Ultem 9085 3D Printing in Yorba Linda CA, you can trust the experts at ProTek Models to get the job done.

Ultem 9085 3D Printing Specs

Thinking that Ultem 9085 3D Printing in Yorba Linda CA might be right for your project? Ultem 9085 has a high FST rating and offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

Contact ProTek Models today if you want to learn more about Ultem 9085 3D Printing in Yorba Linda CA.

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Yorba Linda CA!

Choosing the right material for your FDM 3D printing project is essential. At ProTek Models, we work with all types of materials and can help you select the one that is right for your project. Contact us today to get started with your Ultem 9085 3D Printing project in Yorba Linda CA!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Yorba Linda CA Contact us today.

 

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730