Ultem 9085 3D Printing in San Bernardino CA

Get Accurate Models With Ultem 9085 3D Printing in San Bernardino CA!

Ultem 9085 is a production-grade thermoplastic for Fortus 3D printers. At ProTek Models, we use Fortus 3D printers for a variety of our FDM 3D printing projects. With Ultem 9085 3D Printing in San Bernardino CA, you can take advantage of everything this FDM printing material has to offer. Contact ProTek Models today to get started!

Ultem 9085 3D Printing Specs

Ultem 9085 has a variety of benefits, including a high strength-to-weight ratio and strong FST (flame, smoke and toxicity) rating. Ultem 9085 also provides the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

Contact ProTek Models today to see if v is right for your FDM 3D printing project.

Contact ProTek Models for Reliable Ultem 9085 3D Printing in San Bernardino CA!

At ProTek Models, we know how important it is to deliver quality parts and assemblies that meet your tolerances, schedule, and budget. All of our Ultem 9085 3D printing in San Bernardino CA is done in-house, so you can trust that you will receive only the highest quality results. To learn more about Ultem 9085 3D printing in San Bernardino CA or request a quote for services, contact us today!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in San Bernardino CA Contact us today.

 

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730