Ultem 9085 3D Printing in Riverside CA

Get Accurate Models With Ultem 9085 3D Printing in Riverside CA!

Certified ULTEM 9085 meets more stringent test criteria and retains material traceability required by the aerospace industry. If you are looking to use it in an FDM 3D printing project, you should contact ProTek Models. We have vast experience with Ultem 9085 3D Printing in Riverside CA and would be happy to put our skills to use for you.

Ultem 9085 3D Printing Specs

Ultem provides the following specs for FDM 3D printing projects:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

 

To learn more about Ultem 9085 3D Printing in Riverside CA, contact ProTek Models today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Riverside CA!

Are you looking to utilize Ultem 9085 in an FDM 3D printing application? If that’s the case, you should contact ProTek Models for quality and reliable Ultem 9085 3D Printing in Riverside CA. We have over 15 years of experience and would be happy to work with you on your Ultem 9085 3D printing project. Contact us today to request a quote or get more information about Ultem 9085 3D Printing in Riverside CA.

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Riverside CA Contact us today..

 

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730