Ultem 9085 3D Printing in Placentia CA

Get Accurate Models With Ultem 9085 3D Printing in Placentia CA!

FDM 3D printing can handle projects with very large parts and complex geometries and with ProTek Models at the helm there is no project too big or too small for us to handle. When it comes to Ultem 9085 3D Printing in Placentia CA, you can trust our skilled team to deliver quality parts and assemblies that meet your tolerances, schedule, and budget.

Ultem 9085 3D Printing Specs

Ultem 9085 is a great material choice for certain FDM 3D printing projects because it offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

 

To speak with our team about Ultem 9085 3D Printing in Placentia CA, give us a call today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Placentia CA!

Due to the extensive capabilities of ProTek Models and ProTek 3D, there are very few limitations on how far we can take your 3D printing project. We can handle large and complex assemblies, post-processing, and more! Contact us today to learn more about our Ultem 9085 3D Printing in Placentia CA or request a quote for our FDM 3D printing services.

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D printing in Placentia CA Contact us today..

 

Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730