Ultem 9085 3D Printing in Irvine CA

Get Accurate Models With Ultem 9085 3D Printing in Irvine CA!

Due to the extensive capabilities of ProTek Models and ProTek 3D, there are very few limitations on how far we can take your 3D printing project. With Ultem 9085 3D Printing in Irvine CA, you can meet more stringent test criteria and material traceability required by the aerospace industry. Contact ProTek Models today for affordable and quality Ultem 9085 3D Printing in Irvine CA.

Ultem 9085 3D Printing Specs

At ProTek Models, we offer a variety of materials to choose from for our FDM 3D printing services. Ultem 9085 resin is a great product that offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

If you want to learn more about Ultem 9085 3D Printing in Anaheim CA, contact ProTek Models today!

Contact ProTek Models for Reliable Ultem 9085 3D Printing in Irvine CA!

The experienced team at ProTek Models goes above and beyond with what we call the ProTek Models Difference. Because we do everything in-house, you can always rely on us to deliver quality parts and assemblies that meet your tolerances, schedule, and budget. If you want to take advantage of Ultem 9085 3D Printing in Irvine CA, Contact us today!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D Printing in Anaheim, CA contact us today.
Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730