Ultem 9085 3D Printing in El Segundo CA

Get Accurate Models With Ultem 9085 3D Printing in El Segundo CA!

At ProTek Models, we offer quality and reliable Ultem 9085 3D Printing in El Segundo CA. With Ultem 9085 for FDM 3D Printing, we can create parts that have complex geometries and large footprints. Ultem 9085 3D Printing in El Segundo CA is great for parts requiring high heat, chemical and flame resistance and is actually FAA approved for aircraft interiors. If you need Ultem 9085 3D Printing in El Segundo CA, ProTek Models can help.

Ultem 9085 3D Printing Specs

At ProTek Models, we know how important it is to choose the right material for your FDM 3D Printing job. Our Ultem 9085 3D Printing in El Segundo CA offers the following specs:

Mechanical Properties

  •  Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min): 6,800 – 4,800 psi
  • Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min): 9,950 – 6,100 psi
  • Tensile Modulus (Type 1, 0.125”, 0.2”/min): 312,000 – 329,000
  • Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min): 5.8% – 2.2%
  • Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min): 2.2% – 1.7%
  • Flexural Strength (Method 1, 0.05”/min): 16,200 – 9,900 psi
  • Flexural Modulus (Method 1, 0.05”/min): 331,000 – 297,000 psi
  • Flexural Strain at Break (Method 1, 0.05”/min): 3.7%
  • IZOD Impact, notched (Method A, 23 °C): 2.2 ft – lb/in to 0.9 ft-lb/in
  • IZOD Impact, un-notched (Method A, 23 °C): 14.6 ft – lb/in – 3.2 ft – lb/in
  • Compressive Strength, Yield (Method 1, 0.05”/min): 14,500 – 12,700 psi
  • Compressive Strength, Ultimate (Method 1, 0.05”/min): 26,200 – 13,100 psi
  • Compressive Modulus (Method 1, 0.05”/min): 1,030,000 – 251,000 psi

Thermal Properties

  • Heat Deflection (HDT) @ 264 psi, 0.125” unannealed: 307 °F
  • Glass Transition Temperature (Tg): 367 °F
  • Coefficient of Thermal Expansion: 3.67×10-05 in/(in·°F)

Electrical Properties

  • Volume Resistivity: 4.9 x1015 – 8.2×1015 ohm-cm
  • Dielectric Constant: 3 – 3.2
  • Dissipation Factor: .0026 – .0027
  • Dielectric Strength: 110 – 290 V/mil

If you want to learn more about Ultem 9085 3D Printing in Anaheim CA, contact ProTek Models today!

 

Contact ProTek Models for Reliable Ultem 9085 3D Printing in El Segundo CA!

With Ultem 9085 3D Printing in El Segundo CA, you can utilize a material that features a high strength-to-weight ratio, high thermal and chemical resistance, and flame, smoke, and toxicity (FST) ratings. The ProTek Models team is highly knowledgeable and has worked countless projects that involved Ultem 9085. If you need Ultem 9085 3D Printing in El Segundo CA, contact the experts at ProTek Models!

Contact Us

If you are looking for a custom scale model or more specifically, Ultem 9085 3D Printing in Anaheim, CA Contact us today.
Phone: (909) 477-6866
Fax: (909) 477-6867
Email: info@protekmodels.com
Address:  9155 Archibald Ave., Suite 909, Rancho Cucamonga, CA 91730